The product is used for drilling & collecting the Bone during the Implant surgery.

Preparation before use

1. This product has not been sterilized. It should be sterilized before using in the patient’s mouth.
2. Read radiograph well to make a good choice in accordance with the patient’s condition.

How to use

1. Connect to a dental implant hand piece
2. Decortication, Speed – 300 RPM and no Irrigation
3. Identity the location of alveolar bone to be drilled, slightly fix the cup side of the product to the side of the tooth, and use along with spraying. At this time, use both hands to prevent the hand piece from sliding out of the drilling point.
4. Be careful not to separate the cup and drill from the product while in sue.
5. Move along the product inside the mouth until the drill rotation of the product is completely stopped.
6. After use, remove the alveolar bone within the product, clean, sterilize, and store.

 Cleaning and sterilization

Before and after use, first separate drill and cup

1. Clean by sonication (at least 20 min) until all debris are removed from product.
2. Sterilization time is for 10 minutes minimum (according to ISO 17665-1) at 132°C in the atmosphere.
3. This product must be sterilized by a dentist or a dental hygienist.

Capacity – 0.4 CC